| Autor: |
Robert A. Wattenbarger, Steven F. Mcketta, Ahmad Alkouh |
| Rok vydání: |
2013 |
| Předmět: |
|
| Zdroj: |
Day 3 Wed, October 02, 2013. |
| DOI: |
10.2118/166279-ms |
| Popis: |
Gas production data may be the main tool used to analyze shale gas reservoirs. Water production is usually not included in the analysis. In this paper, post-frac water flowback and long-term water production are added to the analysis. These water data are usually available but are analyzed separately and not combined with long-term gas production data. In this paper, procedures and examples are presented for including water flowback and water production data in the analysis of shale gas wells using rate transient analysis. A number of simulation cases were run. Various physical assumptions were used for the saturations and properties that exist in the fracture/matrix system after hydraulic fracturing. Water flowback and long-term production periods were then simulated. The results of these simulations were compared with data from actual wells using diagnostic and specialized plots. These comparisons lead to certain conclusions which describe well/reservoir conditions after hydraulic fracturing and during production. This paper shows the benefits of a new method for combining water flowback and long-term water production data in shale gas analysis. Water production analysis can provide effective fracture volume which was confirmed by the cumulative produced water. This will help when evaluating fracture-stimulation jobs. It also shows some pitfalls of ignoring flowback data. In some cases the time shift on diagnostic plots changes the apparent flow regime identification of the early gas production data as well as water production data. This leads to different models of the fracture/matrix system. The presented work shows the importance of including water flowback data in the long-term production analysis. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
