Jet cup attrition testing

Autor: Ray Cocco, Y. Arrington, Ted M. Knowlton, John G. Findlay, S.B.R. Karri, Roy Hays
Rok vydání: 2010
Předmět:
Zdroj: Powder Technology. 200:224-233
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2010.02.029
Popis: Jet cup attrition testing is a common method for evaluating particle attrition in fixed fluidized beds and circulating fluidized beds. An attrition index, calculated from jet cup data, is used to compare with one or more reference materials. However, this method is far from perfect despite its popularity. Results obtained at Particulate Solid Research, Inc. (PSRI) in different-sized jet cups and a 29-cm (11.5-in.) diameter fluidized bed test unit did not provide the same ranking of catalyst with respect to particle attrition. To obtain a better understanding of attrition in a jet cup, both computational fluid dynamics (CFD) and cold flow studies were performed with a 2.5-cm (1-in.) diameter Davison-type jet cup and PSRI's cylindrical 7.6-cm (3-in.) diameter jet cup. Results showed that a significant amount of material in the Davison and PSRI jet cup remained stagnant. Based on these results and additional CFD modeling, PSRI designed a new jet cup, where most of the material was hydrodynamically active. The new jet cup showed a 25% increase in attrition compared to PSRI's cylindrical jet cup under similar conditions and run times. Results were also compared to cyclone attrition data for several materials at PSRI. The new jet cup provided data that correlated with attrition results from the 29-cm (11.5-in.) diameter fluidized bed unit.
Databáze: OpenAIRE
Externí odkaz: