Research on Mix Proportion Design Method of Cement Concrete for Road Mixed with Antifreeze Admixtures Sealed in Capsules
Autor: | Hong Fa Yu, Yue Li, Yang Zhao, Wei Dong Wang |
---|---|
Rok vydání: | 2020 |
Předmět: |
Cement
Materials science Waste management 020502 materials Mechanical Engineering 0211 other engineering and technologies 02 engineering and technology Mix design 0205 materials engineering Flexural strength Mechanics of Materials Antifreeze 021105 building & construction General Materials Science Mix proportion |
Zdroj: | Key Engineering Materials. 861:429-437 |
ISSN: | 1662-9795 |
DOI: | 10.4028/www.scientific.net/kem.861.429 |
Popis: | In order to explore the influence of a new mixed type antifreeze material on the flexural strength of concrete for road, the orthogonal design method was used to conduct experimental research on six factors including the water-binder ratio, the antifreeze material content, the fly ash content, the feeding process, the shape of the antifreeze material and the pre-absorption of antifreeze material. The influence degree of various factors on the flexural strength of concrete was studied, and the mixing ratio design method of concrete for road mixed with the antifreeze material was given. It was found that the water-binder ratio is the main factor affecting the strength of the concrete and that when the amount of antifreeze material is less than 15%, the effect on the strength is small. The influence of other factors on the strength is greatly influenced by the interaction of water-binder ratio. When it comes to the mix design, the content of gelling material is 500 kg/m3, and the water-binder ratio changes from 0.35 to 0.43 under different traffic levels. The recommended antifreeze material content and fly ash content is 10% and 15% respectively. It’s also suggested that the antifreeze material should be pre-absorbed, and the cement sand and stone be mixed before the antifreeze material is put into the mixing. |
Databáze: | OpenAIRE |
Externí odkaz: |