A new method of making ohmic contacts to p-GaN
Autor: | V.M. Sánchez-Reséndiz, Y. L. Casallas-Moreno, Esteban Mota, A. G. Hernandez, Máximo López-López, Yu. Kudriavtsev, A. Escobosa-Echavarria, C.A. Hernández-Gutiérrez |
---|---|
Rok vydání: | 2016 |
Předmět: |
010302 applied physics
Nuclear and High Energy Physics Materials science Scanning electron microscope Contact resistance Analytical chemistry 02 engineering and technology 021001 nanoscience & nanotechnology 01 natural sciences Ion Secondary ion mass spectrometry symbols.namesake Ion implantation 0103 physical sciences Electrode symbols 0210 nano-technology Raman spectroscopy Instrumentation Ohmic contact |
Zdroj: | Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. 388:35-40 |
ISSN: | 0168-583X |
DOI: | 10.1016/j.nimb.2016.11.001 |
Popis: | The structural, chemical, and electrical characteristics of In + ion-implanted Au/Ni, Au/Nb and Au/W ohmic contacts to p-GaN were investigated. After the preparation of Ni, Nb and W electrode on the surface of p-GaN, the metal/p-GaN contact interface was implanted by 30 keV In + ions with an implantation dose of 5 × 10 15 ions/cm 2 at room temperature to form a thin layer of In x Ga 1-x N located at the metal-semiconductor interface, achieved to reduce the specific contact resistance due to the improving quantum tunneling transport trough to the structure. The characterization was carried out by high-resolution X-ray diffraction, scanning electron microscopy, Raman spectroscopy, and secondary ion mass spectrometry to investigate the formation of ternary alloy, re-crystallization by rapid thermal annealing process after In + implantation, and the redistribution of elements. The specific contact resistance was extracted by current-voltage (I-V) curves using transmission line method; the lowest specific contact resistance of 2.5 × 10 −4 Ωcm 2 was achieved for Au/Ni/p-In x Ga 1-x N/p-GaN ohmic contacts. |
Databáze: | OpenAIRE |
Externí odkaz: |