Stimuli-responsive polymer as gate dielectric for organic transistor sensors
Autor: | Chih-Wei Chu, Cut Rullyani, Mriganka Singh, Sheng Han Li, Chao Feng Sung, Hong-Cheu Lin |
---|---|
Rok vydání: | 2020 |
Předmět: |
Electron mobility
Materials science Gate dielectric 02 engineering and technology Dielectric 010402 general chemistry 01 natural sciences law.invention Biomaterials Pentacene chemistry.chemical_compound law Materials Chemistry Electrical and Electronic Engineering business.industry Transistor General Chemistry 021001 nanoscience & nanotechnology Condensed Matter Physics 0104 chemical sciences Electronic Optical and Magnetic Materials Threshold voltage Semiconductor chemistry Thin-film transistor Optoelectronics 0210 nano-technology business |
Zdroj: | Organic Electronics. 85:105818 |
ISSN: | 1566-1199 |
DOI: | 10.1016/j.orgel.2020.105818 |
Popis: | Temperature is a characteristic often correlated with environmental and health issues. This paper presents an organic thin film transistor (OTFT) based temperature sensor having a detection range of 30–45 °C, which, therefore, encompasses the human body temperature. The OTFT sensor featured thermosensitive poly(N-isopropylacrylamide) (PNIPAM) and pentacene as the gate dielectric and semiconductor, respectively. The PNIPAM film possessed a dielectric constant of 4.2 with very low leakage current density. The OTFT exhibited high electrical performance, with a hole mobility (μ) of 0.90 ± 0.04 cm2 V−1 s−1, a threshold voltage (Vth) of −15.4 ± 1.16 V, and an on/off ratio of 104. Significant changes in the drain current and the values of Vth and μ occurred when the temperature of the device was varied within the range 30–45 °C at an interval of 0.5 °C. The operating principle for this temperature sensor was based on the structural transformation of the PNIPAM dielectric and the enhanced charge transport of the pentacene semiconductor upon varying the temperature. Flexible OTFTs fabricated on polyethylene terephthalate substrate displayed hole mobilities as high as 0.39 ± 0.01 cm2 V−1 s−1, values of Vth of −18.6 ± 0.45, and on/off ratios of 102, and were workable for over 100 bending cycles. |
Databáze: | OpenAIRE |
Externí odkaz: |