Design of monocentric wide field-of-view and high-resolution computational imaging system
| Autor: | Han Ping-Li, Wei Ya-Zhe, Shao Xiaopeng, Liu Jia-Wei, Liu Fei |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
Computer science
business.industry Aperture Distortion (optics) ComputingMethodologies_IMAGEPROCESSINGANDCOMPUTERVISION Astrophysics::Instrumentation and Methods for Astrophysics General Physics and Astronomy law.invention Lens (optics) Spherical aberration Fisheye lens Optics law Chromatic aberration Imaging technology business Zemax |
| Zdroj: | Acta Physica Sinica. 68:084201 |
| ISSN: | 1000-3290 |
| DOI: | 10.7498/aps.68.20182229 |
| Popis: | Imaging systems with a wide field-of-view (FOV) and high-resolution, which can provide abundant target information, are always desired in various applications including target detection, environment monitoring, marine rescue, etc. Various approaches to realizing the wide FOV and high-resolution imaging have been developed, for example, fisheye lens imaging system, and panoramic optical annular staring imaging technology. In these single aperture imaging systems, the maximum resolution and FOV are determined by either the geometric aberration or the diffraction limit of the optics. Multi-scale monocentric ball-lens imaging system is of particular importance due to its high real-time ability, small image distortion, and wide FOV. The complete geometrical symmetry of multilayer monocentric ball-lens makes it possible to compensate for the geometric aberration with no need of additional assistance. However, the major problem in designing imaging system based on multi-scale monocentric ball-lens is that there are too many variables needed to be set for a ball-lens imaging structure and the problems of high time cost and computation complexity.For simplifying the design process, in this manuscript, we apply the computational imaging theory to optical system design, thereby developing a geometric aberration optimization function to determine the initial values of the desired system by the sound computation rather than repetitive iterations by using the optical system design software. Function development starts from the aberration theory. Since the monocentric ball lens does not bring in the aberrations relating to FOV, only spherical aberration and chromatic aberration are needed to be considered. The optimization function is then founded according to the principle of minimizing the spherical aberration and chromatic aberration. And then with the determined initial parameters, ZEMAX is employed to globally optimize the residual geometric aberrations, which is time-efficient. After required parameters are finally determined, the system performance is evaluated via the modulation transmission function, the spot diagram distribution, the field-curve and distortion value and the ray fan curve. Favorable results are obtained, which demonstrates the feasibility of the developed system designing approach. Imaging results from the finished prototype system are pretty satisfactory with wide FOV and high resolution which is captured through only one frame. The multi-scale wide FOV and high-resolution computation imaging system not only solves the conflict between the wide FOV and high resolution, but also provides the research foundation for computational imaging. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|