| Popis: |
This study reports on signal recovery of optical fiber Bragg gratings embedded in a carbon fiber composite overwrapped pressure vessel's (COPV) structure which have become chirped due to microcracks. COPVs are commonly used for the storage of high pressure liquids and gases. They utilize a thin metal liner to seal in contents, with a composite overwrap to strengthen the vessel with minimal additional mass. A COPV was instrumented with an array of surface mounted and embedded fiber Bragg gratings (FBGs) for structural health monitoring (SHM) via strain sensing of the material. FBGs have been studied as strain sensors for the last couple decades. Many of the embedded FBGs reflected a multi-peak, chirped response which was not able to be interpreted well by the current monitoring algorithm. Literature and this study found that the chirping correlated with microcracks. As loading increases, so does the number of chirped FBGs and microcracks. This study uses optical frequency domain reflectometry (OFDR) to demultiplex the array of FBGs, and then sub- divide individual FBGs. When a FBG is sub-divided using OFDR, the gratings' strain along its length is recovered. The sub-divided chirped FBGs have strain gradients along their length from microcracks. Applying this to all chirped gratings, nearly the entirety of the embedded sensors' readings can be recovered into a series of single peak responses, which show very large local strains throughout the structure. This study reports on this success in recovering embedded FBGs signal, and the strain gradient from microcracks. |
