Finite element modelling of compressive mechanical behaviour of high and low density polymeric foams

Autor: M.M. Petite, M.A. Rodríguez-Pérez, A. Mendizabal, P. Alvarez, A. Echeverria
Rok vydání: 2009
Předmět:
Zdroj: Materialwissenschaft und Werkstofftechnik. 40:126-132
ISSN: 1521-4052
0933-5137
Popis: In this work, different methodologies were studied by means of finite element modelling (FEM) with the aim of predicting the mechanical behaviour of high and low relative density (ρr) polymeric foams. Virtual structures which resemble the real ones were created by various computer-based tools. These tools were employed to make up both “unit cells” and random structural units so-called “Representative Volume Elements” (RVE). Low ρr foams are usually modelled as regular (tetrakaidecahedron) and irregular (Voronoi tessellations) 3D structures made of structural elements (beams and shells). These types of finite elements are only applicable if the ratio between longitudinal and axial dimensions exceeds a certain value and therefore, there is a practical relative density limit above which these elements are not suitable. Alternatively, virtual low ρr foams were created by means of cellular automata which allow a close control of bubble growth and final cell character and do not show the previous limitation. Additionally, virtual high ρr structures (ρr > 0.5) consisting of isolated bubbles or cells were created by random incorporation of cell sets whose size distributions adjust to experimentally measured ones. A random sequential adsorption algorithm (RSA) which accurately controls final thickness of ligaments between cells was programmed for this purpose. FEM results of this kind of virtual foams are compared with experimentally tested mechanical properties. Moreover, impact of structural parameters (mean cell size) on elastic modulus and compressive collapse stress is critically assessed.
Databáze: OpenAIRE
Externí odkaz: