Development of Green Composites Based on Polypropylene and Corncob Agricultural Residue

Autor: I. F. Leite, Eliton S. Medeiros, R. R. F. Ramos, Renate Maria Ramos Wellen, G. M. Glenn, Danilo Diniz Siqueira
Rok vydání: 2019
Předmět:
Zdroj: Journal of Polymers and the Environment. 27:1677-1685
ISSN: 1572-8919
1566-2543
DOI: 10.1007/s10924-019-01462-7
Popis: Green composites of polypropylene (PP) and corncob (CCB) agricultural residue with CCB content ranging from 5 to 30 wt% were compounded by melt extrusion and their properties investigated by density measurements, thermogravimetric analyses, differential scanning calorimetry, scanning electron microscopy (SEM) and tension, flexural and impact properties. Properties were dependent on CCB content. SEM micrographs showed that PP/CCB composites are composed of all layers of the corncob, but with a higher content of woody ring and pith. Composites with CCB up to 20 wt% presented particles evenly dispersed into PP matrix and density values ranging from 0.929 to 1.026 g/cm3. Thermal analyses showed that CCB is thermally stable up to 200 °C, ensuring that no degradation took place during processing, and PP/CCB composites are more crystalline than neat PP. Tensile strength and elongation at break of the composites decreased respectively from 30 to 20 MPa, and 22.7 to 3.7%, and the elastic modulus increased while the impact strength remained practically constant at 14 J/m for the filling contents tested. Elastic and flexural moduli increased respectively from 906 MPa to 1.1 GPa and from to 1.26 to 1.81 GPa with corncob addition.
Databáze: OpenAIRE
Externí odkaz: