New Insights into Steam-Solvent Co-injection Process Mechanism

Autor: Ian Phillip Benson, Mridul Kumar, Raman Kumar Jha, Edward J. Hanzlik
Rok vydání: 2012
Předmět:
Zdroj: All Days.
DOI: 10.2118/159277-ms
Popis: We present results of a detailed investigation of the steam-solvent co-injection process mechanism using a homogeneous numerical model and three different solvents. The mechanistic model developed in this study describes coupled heat and mass transfer at the chamber boundary and its implications in detail. We present a composite picture of interplay of the process variables, the important phenomena occurring in the different regions of the reservoir and their consequences for oil recovery. The results are corroborated by literature experimental results and field data. The model will help with selecting the best operating strategy for a given reservoir.Results show that the injected steam and solvent vapor condense near the steam chamber boundary. The temperature near the chamber boundary drops because of a reduction in the partial pressure of steam.The condensed steam-solvent mixture drains outside the chamber boundar leading to the formation of a mobile liquid stream where heated oil, water and condensed solvent flow together to the production well. The condensed solvent and water are immiscible and therefore, form separate flow streams. The condensed solvent mixes with the heated oil in the water-oil stream and reduces its viscosity beyond that caused by heating alone, resulting in higher oil production rate. As the steam chamber expands laterally because of continued injection and temperature in the hitherto drainage region increases, part of the condensed solvent mixed with oil evaporates. This lowers the residual oil saturation in the steam chamber. Therefore, ultimate oil recovery with steam-solvent co-injection process is higher than that in steam only injection. The higher the solvent concentration in oil at a location, the greater is the reduction in the residual oil saturation at that location.Thus, steam-solvent co-injection causes a higher oil production rate because of an additional reduction in oil viscosity and a higher ultimate recovery because of a reduction in residual oil saturation.
Databáze: OpenAIRE