DyPO4 flower-like superstructures and macroporous microstructures from dysprosium-based coordination polymer wires
Autor: | Sheng-Liang Zhong, Lei Wang, Lin-Fei Zhang, Longfei Luo |
---|---|
Rok vydání: | 2012 |
Předmět: |
Thermogravimetric analysis
Materials science Coordination polymer Scanning electron microscope General Chemical Engineering Infrared spectroscopy chemistry.chemical_element Nanotechnology chemistry.chemical_compound chemistry Chemical engineering Differential thermal analysis Dysprosium Selected area diffraction High-resolution transmission electron microscopy |
Zdroj: | Powder Technology. 230:151-157 |
ISSN: | 0032-5910 |
DOI: | 10.1016/j.powtec.2012.07.023 |
Popis: | This article presents a facile approach about the designed synthesis of one-dimensional (1D) dysprosium-based coordination polymer wires under solvothermal conditions with dysprosium chloride and tributyl phosphate (TBP) as starting materials. The wires are in the length of several hundreds of micrometers and diameter in the range of 0.4–2 μm. Time-dependent results revealed that the coordination polymer wires were not stable and evolved into three-dimensional (3D) flower-like tetragonal DyPO 4 superstructures with the prolonging of reaction time. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), selected area electron diffraction (SAED), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), energy disperse spectroscopy (EDS), thermogravimetric analysis (TG) and differential thermal analysis (DTA) were employed to characterize the samples. Interestingly, with the assistance of lauryl sodium sulfate, rice-like macroporous hexagonal DyPO 4 microstructures with a BET surface area of 2.13 m 2 /g were successfully fabricated. A possible formation mechanism for the morphology evolution of the DyPO 4 superstructures was also discussed. Magnetic measurement revealed that the products were antiferromagnetic. |
Databáze: | OpenAIRE |
Externí odkaz: |