Electrically active defects in shallow pre-amorphisedp + n junctions in silicon
| Autor: | Stanley D. Brotherton, J. P. Gowers, J. B. Clegg, John R. A. Ayres |
|---|---|
| Rok vydání: | 1989 |
| Předmět: |
Materials science
Deep level Silicon Solid-state physics Annealing (metallurgy) chemistry.chemical_element Condensed Matter Physics Molecular physics Electronic Optical and Magnetic Materials Recoil chemistry Materials Chemistry Leakage current density Electrical and Electronic Engineering p–n junction Leakage (electronics) |
| Zdroj: | Journal of Electronic Materials. 18:173-184 |
| ISSN: | 1543-186X 0361-5235 |
| DOI: | 10.1007/bf02657405 |
| Popis: | An examination of shallow pre-amorphisedp + n junctions in silicon has revealed three distinct defect related phenomena determined largely by the annealing temperature and relative location of the junction and the amorphous-crystalline (α-c) boundary. For temperatures below 800‡ C all samples displayed leakage currents of ∼10−3 A/cm2 irrespective of the amorphising atom (Si+, Ge+ or Sn+). The generation centres responsible were identified to be near mid-gap deep level donors lying beyond the α-c interface. For samples annealed above 800‡ C, the leakage current was determined by the interstitial dislocation loops at the α-c boundary. If these were deeper than the junction, a leakage current density of ∼10−5 A/cm2 resulted. From the growth of these loops during furnace annealing it was concluded that the growth was supported by the influx of recoil implanted silicon interstitials initially positioned beyond the α-c boundary. In the case where the as-implanted junction was deeper than the α-c boundary, annealing above 800° C resulted in a transient enhancement in the boron diffusion coefficient. As with the dislocation loop growth, this was attributed to the presence of the recoil implanted silicon interstitials. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full text from SpringerLink