Performance Analysis of Different Type PV Module for 3kW Residential Roof Top PV System using PVSyst Simulation tool
| Autor: | A. Z Abdullah, M H Amlus, N Azizan, I M Sali, M H Rahim |
|---|---|
| Rok vydání: | 2022 |
| Předmět: | |
| Zdroj: | Journal of Physics: Conference Series. 2312:012042 |
| ISSN: | 1742-6596 1742-6588 |
| Popis: | The purpose of this article is to discuss a performance comparison of solar panel between mono crystalline, poly crystalline and HIT photovoltaic for roof top solar photovoltaic (PV) system. Residential PV power generation is a growing fast nowadays due to technology transfer success to everyone while also serving as a renewable energy source. Correct selection of PV modules possible to get a fast return of investment while wrong selection is vice versa. Three type of PV panel was applying in 3.12kW rooftop PV design in Selangor, Malaysia residential this work for comparison analysis. To make a fair comparison, the PV module analyse with same location, weather, orientation and losses. Simulation was performed fully under PVSyst software and looking at performance ratio system, a yearly balanced, effective output energy, daily output generation, system output generation, and yearly system losses. In this article the performance of three different types of PV panels is demonstrated. The HIT PV module shows the highest yearly performance ratio up to 81 % compare to mono and poly type. The normalized production with standardized variable to evaluate the PV output including collection losses, device losses and energy generated show the HIT type produces lowest losses while highest output. The performance of HIT PV module was good compared to PV module mono and poly type; this is due to the lower losses and high output produce significantly. The PV system’s payback period can be shortened, and the PV system can perform better, if the PV panels are more efficient. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|