| Autor: |
Chang-Chun Zhu, Fanguang Zeng, Xinghui Liu, Weihua Liu |
| Rok vydání: |
2006 |
| Předmět: |
|
| Zdroj: |
Microelectronics Journal. 37:495-499 |
| ISSN: |
0026-2692 |
| DOI: |
10.1016/j.mejo.2005.09.001 |
| Popis: |
Screen-printing is undoubtedly the most cost effective process for the fabrication of large-sized carbon nanotube field emission display (CNT-FED). A novel post-treatment method of mechnical crushing and blowing was presented to solve the problem of poor field emission properties of printed CNT films. The turn-on electric field of the treated film decreased and the emission current increased distinctly. Then a technique was developed to fabricate fully printed CNT-FED in which all the inner cells were fabricated by screen-printing process. Based on this technique, fully printed matrix-addressable diode CNT-FEDs, which can display moving image and be driven by the integrated drive circuits of commercial plasma display panel (PDP), were fabricated subsequently. A very high brightness of 1×104 cd/m2 can be achieved at 220 V. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect