Effects of fuel properties on self-ignition and flame-holding performances in SCRAM jet combustor for n-alkane fuels
| Autor: | Shunsuke Nishida, Shunsuke Suzuki, Osamu Imamura, Michikata Kono, George Ianus, Mitsuhiro Tsue, Koshiro Fukumoto, Yasushige Ujiie |
|---|---|
| Rok vydání: | 2011 |
| Předmět: |
chemistry.chemical_classification
Waste management Hydrogen Chemistry Mechanical Engineering General Chemical Engineering Nuclear engineering chemistry.chemical_element Combustion law.invention Ignition system Hydrocarbon law Combustor Total air temperature Scramjet Physical and Theoretical Chemistry Total pressure |
| Zdroj: | Proceedings of the Combustion Institute. 33:2391-2398 |
| ISSN: | 1540-7489 |
| DOI: | 10.1016/j.proci.2010.07.070 |
| Popis: | Combustion characteristics of liquid hydrocarbon fuels are studied in a model combustor of SCRAM jet engines. The Mach number and total pressure of main flow in the combustor are 2.0 and 0.38 MPa, respectively, and the total temperature is varied from 1800 to 2400 K. Five kinds of n-alkane fuels such as n-heptane, n-octane, n-decane, n-tridecane and n-hexadecane are employed in experiments. Fuels are injected with a carrier nitrogen gas perpendicular to the mail flow in the combustor and the self-ignition behavior is investigated. The results show that the liquid fuels with lower carbon number have better self-ignition performance. This suggests that physical properties of liquid fuels such as volatility have a dominant effect on the self-ignition. The flame-holding behavior is investigated with the addition of pilot hydrogen to carrier nitrogen gas. The critical equivalence ratio at which the stable combustion keeps after cut-off of the pilot hydrogen is obtained. The relationship between the critical equivalence ratio and carbon number of fuel shows that fuels with the carbon numbers from 8 to 10 have the best flame-holding performance among the tested fuels. These experimental results can be expressed qualitatively by the simplified analysis with the concept of physical and chemical induction times. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect