The effects of sintering temperature on structural, electrical, and magnetic properties of MgFe1.92Bi0.08O4
Autor: | Amin Yourdkhani, Seyed Ali Seyed Ebrahimi, Niousha Varastegani, Aurelian Rotaru |
---|---|
Rok vydání: | 2021 |
Předmět: |
Materials science
Sintering Dielectric Coercivity Conductivity Condensed Matter Physics Grain size Electronic Optical and Magnetic Materials Lattice constant Mechanics of Materials visual_art Materials Chemistry Ceramics and Composites visual_art.visual_art_medium Dielectric loss Ceramic Electrical and Electronic Engineering Composite material |
Zdroj: | Journal of Electroceramics. 46:151-161 |
ISSN: | 1573-8663 1385-3449 |
Popis: | In this article, MgFe1.92Bi0.08O4 ceramics were prepared by the solid-state synthesis method followed by sintering at 1000, 1050, 1100, and 1150 °C. The effects of sintering temperature on structural, electrical, and magnetic properties were systematically investigated. The results showed that by increasing the sintering temperature, the lattice parameter was increased from 8.376 to 8.405 A, the relative density was improved up to 97.1 %, the average grain size was increased from 1.92 to 4.12 μm, the d.c conductivity was increased from 38.4 to 5.8 MΩ.cm, the saturation magnetization was increased from 15.9 to 20.2 emu/g, and the coercive field was increased from 9.7 to 6.7 Oe. According to Maxwell and Wagner’s two-layer model, the dielectric behavior and AC conductivity of the samples were explained based on the space charge polarization. The sample sintered at 1050 °C revealed the optimum dielectric properties with a 0.016 dielectric loss and a 24.4 dielectric constant at 10 MHz. Further increasing the sintering temperature resulted in increasing the dielectric constant and dielectric loss up to 33.1, 0.156, respectively, due to the increased thermal activation of electron hopping between Fe2+ and Fe3+ ions. |
Databáze: | OpenAIRE |
Externí odkaz: |