| Autor: |
O. M. Jadaan, D. L. Shelleman, J. C. Conway, J. J. Mecholsky, R. E. Tressler |
| Rok vydání: |
1991 |
| Zdroj: |
9th Biennial Conference on Reliability, Stress Analysis, and Failure Prevention. |
| DOI: |
10.1115/detc1991-0020 |
| Popis: |
The objective of this paper is to develop the analytical background for test methodologies that will enable accurate prediction of the strength distribution of ceramic tubular components from the strength distributions of simple specimens. Four simple specimen configurations and two tubular configurations were selected for this purpose. The simple specimen configurations were (1) four point bend, (2) c-ring tested in compression, (3) c-ring tested in tension and (4) o-ring tested in diametral compression. In addition, a short tube tested by axially compressing rubber inside the tube and a long tube subjected to internal pressure were analyzed. These specimen configurations were for the most part selected in a tubular shape in order to simulate the shape of tubular structural components. The prediction of the strength distribution of one specimen from that of another was based on Weibull statistical theory. Effective volume and area expressions, necessary for failure prediction, were derived for these specimen configurations. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
