| Autor: |
Hsi-Yung T. Wu, Marshall Rouse, Adam Przekop, Dawn C. Jegley, Andrew E. Lovejoy |
| Rok vydání: |
2016 |
| Předmět: |
|
| Zdroj: |
57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. |
| DOI: |
10.2514/6.2016-2176 |
| Popis: |
The Environmentally Responsible Aviation Project aimed to develop aircraft technologies enabling significant fuel burn and community noise reductions. Small incremental changes to the conventional metallic alloy-based ‘tube and wing’ configuration were not sufficient to achieve the desired metrics. One airframe concept identified by the project as having the potential to dramatically improve aircraft performance was a compositebased hybrid wing body configuration. Such a concept, however, presented inherent challenges stemming from, among other factors, the necessity to transfer wing loads through the entire center fuselage section which accommodates a pressurized cabin confined by flat or nearly flat panels. This paper discusses finite element analysis and testing of a large-scale hybrid wing body center section structure developed and constructed to demonstrate that the Pultruded Rod Stitched Efficient Unitized Structure concept can meet these challenging demands of the next generation airframes. Part I of the paper considers the five most critical load conditions, which are internal pressure only and positive and negative g-loads with and without internal pressure. Analysis results are compared with measurements acquired during testing. Performance of the test article is found to be closely aligned with predictions and, consequently, able to support the hybrid wing body design loads in pristine and barely visible impact damage conditions. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
