| Autor: |
Tracie Prater, Brian T. Gibson, A.M. Strauss, George E. Cook, Chase Cox, William R. Longhurst |
| Rok vydání: |
2015 |
| Předmět: |
|
| Zdroj: |
Industrial Robot: An International Journal. 42:192-199 |
| ISSN: |
0143-991X |
| Popis: |
Purpose The purpose of this paper is to evaluate the tool experiences using torque during welding as a means of in-process sensing for tool wear. Metal matrix composites (MMCs) are materials with immense potential for aerospace structural applications. The major barrier to implementation of these materials is manufacturability, specifically joining MMCs to themselves or other materials using fusion welding. Friction stir welding (FSW) is an excellent candidate process for joining MMCs, as it occurs below the melting point of the material, thus precluding the formation of degradative intermetallics’ phases present in fusion welded joints. The limiting factor for use of FSW in this application is wear of the tool. The abrasive particles which give MMCs their enhanced properties progressively erode the tool features that facilitate vertical mixing and consolidation of material during welding, resulting in joints with porosity. While wear can be mitigated by careful selection of process parameters and/or the use of harder tool materials, these approaches have significant complexities and limitations. Design/methodology/approach This study evaluates using the torque the tool experiences during welding as a means of in-process sensing for tool wear. Process signals were collected during linear FSW of Al 359/SiC/20p and correlated with wear of the tool probe. The results of these experiments demonstrate that there is a correlation between torque and wear, and the torque process signal can potentially be exploited to monitor and control tool wear during welding. Findings Radial deterioration of the probe during joining of MMCs by FSW corresponds to a decrease in the torque experienced by the tool. Experimentally observed relationship between torque and wear opens the door to the development of in-process sensing, as the decay in the torque signal can be correlated to the amount of volume lost by the probe. The decay function for tool wear in FSW of a particular MMC can be determined experimentally using the methodology presented here. The decay of the torque signal as the tool loses volume presents a potential method for control of the wear process. Originality/value This work has near-term commercial applications, as a means of monitoring and controlling wear in process could serve to grow commercial use of MMCs and expand the design space for these materials beyond net or near-net-shape parts. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
