Bark as feedstock for dual fluidized bed gasifiers-Operability, efficiency, and economics
| Autor: | Johan Ahlström, Simon Harvey, Henrik Thunman, Anton Larsson, Claes Breitholtz, Alberto Alamia |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
Renewable Energy
Sustainability and the Environment 020209 energy Pellets Energy Engineering and Power Technology 02 engineering and technology Raw material 021001 nanoscience & nanotechnology Pulp and paper industry Fuel Technology Nuclear Energy and Engineering Biogas Biofuel Fluidized bed visual_art 0202 electrical engineering electronic engineering information engineering visual_art.visual_art_medium Environmental science Heat of combustion Bark 0210 nano-technology Water content |
| Zdroj: | International Journal of Energy Research. 43:1171-1190 |
| ISSN: | 0363-907X |
| DOI: | 10.1002/er.4349 |
| Popis: | The demand for biofuels and biochemicals is expected to increase in the future, which will in turn increase the demand for biomass feedstock. Large gasification plants fueled with biomass feedstock are likely to be a key enabling technology in a resource-efficient, bio-based economy. Furthermore, the costs for producing biofuels and biochemicals in such plants could potentially be decreased by utilizing inexpensive low-grade residual biomass as feedstock. This study investigates the usage of shredded tree bark as a feedstock for the production of biomethane in the GoBiGas demonstration plant in Gothenburg, Sweden, based on a 32 MWth industrial dual fluidized bed gasification unit. The plant was operated with bark feedstock for 12 000 hours during the period 2014 to 2018. Data from the measurement campaign were processed using a stochastic approach to establish the plant's mass and energy balances, which were then compared with operation of the plant with wood pellets. For this comparison, an extrapolation algorithm was developed to predict plant performance using bark dried to the same moisture content as wood pellets, ie, 8%w.b. Plant operation with bark feedstock was evaluated for operability, efficiency, and feedstock-related cost. The gas quality achieved during the test period was similar to that obtained for operation with wood pellets. Furthermore, no significant ash sintering or agglomeration problems were observed more than 750 hours of operation. The calculated biomass-to-biomethane efficiency is 43% to 47% (lower heating value basis) for operation with wet bark. However, the predicted biomass-to-biomethane efficiency can be increased to 55%–65% for operation with bark feedstock dried to 8% moisture content, with corresponding feedstock costs in the range of 24.2 to 32.7 EUR/MWh; ie, a cost reduction of about 40% compared with wood pellets. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|