Characterizing the Dynamic Behavior of Staple Length-Distributed Slivers in Roller Drafting
| Autor: | You Huh, Jong S. Kim, Jung Ho Lim |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
Linear density
Steady state Materials science Polymers and Plastics General Chemical Engineering Mode (statistics) 02 engineering and technology General Chemistry Mechanics 021001 nanoscience & nanotechnology Viscosity 020401 chemical engineering Hull Range (statistics) 0204 chemical engineering 0210 nano-technology |
| Zdroj: | Fibers and Polymers. 19:219-229 |
| ISSN: | 1875-0052 1229-9197 |
| DOI: | 10.1007/s12221-018-7821-4 |
| Popis: | Roller drafting is often accompanied by an irregularity in the linear density of slivers. In this research, the issue of sliver irregularity was investigated by simulating the dynamic behavior of slivers in the roller draft zone based on an improved mathematical model describing the movement of slivers with a staple-length distribution. The linear density and velocity of slivers in the draft zone were considered coupled variables. Simulations under certain constraints in the parameters, changing only the sliver viscosity, revealed that the sliver linear density can fluctuate during steady state (the socalled draft wave) in a certain range of sliver viscosity, and those fluctuations can be decomposed into several mode frequencies. However, the draft wave did not appear when slivers with low viscosity were used, suggesting that good open slivers composed of low surfacefriction staples can yield to a good drafted sliver without draft waves. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full text from SpringerLink