Enhancement of maltodextrin-based adhesive properties using ammonium dihydrogen phosphate (ADP)

Autor: G K Dewi, R Widyorini, G Lukmandaru
Rok vydání: 2021
Předmět:
Zdroj: IOP Conference Series: Earth and Environmental Science. 891:012004
ISSN: 1755-1315
1755-1307
DOI: 10.1088/1755-1315/891/1/012004
Popis: Maltodextrin is a new saccharide-based adhesive that can be potentially developed as an alternative for particleboard due to its abundant resources. The addition of ammonium dihydrogen phosphate (ADP) was expected to be able to improve the properties of the maltodextrin, especially the water resistance of the cured adhesive. This study aimed to investigate the properties of maltodextrin/ADP adhesive in the ratios of 100/0, 90/10 and 80/20 wt%. The results showed that the increasing ratio of ADP in maltodextrin-based adhesive can increase not only the insoluble matter rate during boiling condition, but also the other adhesive properties of maltodextrin by lowering the viscosity and increasing the wettability tested in salacca frond particles. The pH adhesive decreased along with the increased ADP ratio. Oneway analysis of variance and Tukey test showed that the maltodextrin/ADP ratios significantly affected the adhesive properties. The thermogravimetric analysis (TGA) of dried mixture adhesive showed the significant changes in the onset and the highest weight reduction temperature of maltodextrin after the ADP addition. The FTIR analysis detected some new peaks that were expected to be related to furan ring and carbonyl groups after the maltodextrin/ADP 90/10 and 80/20 wt% were heated at 200°C for 10 minutes and/or 15 minutes. Maltodextrin/ADP 80/20 wt% had the best adhesive properties for particleboard application.
Databáze: OpenAIRE