Fracture-matrix interactions during immiscible three-phase flow

Autor: Mohamed Ahmed Elfeel, Sebastian Geiger, Marinus Izaak Jan Van Dijke, Adnan Al-Dhahli
Rok vydání: 2016
Předmět:
Zdroj: Journal of Petroleum Science and Engineering. 143:171-186
ISSN: 0920-4105
DOI: 10.1016/j.petrol.2016.02.012
Popis: Naturally Fractured Reservoirs (NFR) contain a significant amount of remaining petroleum reserves and are now considered for Enhanced Oil Recovery (EOR) schemes that involve three-phase flow such as water-alternating-gas (WAG) injection. Reservoir simulation of three phase flow is challenging because a proper set of flow functions, i.e. relative permeability and capillary pressure functions, that describe the underlying physics of fluid displacement is vitally important to obtain reliable production forecasts but associated with high uncertainty. For NFR, another challenge is the upscaling of recovery processes, particularly fracture-matrix transfer during three-phase flow, to the reservoir scale using dual porosity or dual permeability models. In this work we approach a solution to these challenges by analysing three-phase flow during WAG injection at various scales, starting at the pore scale and then move on to an intermediate scale which is comparable to the scale of a single reservoir simulation grid block. At this scale, we represent fractures and matrix using a fine-grid model that employs empirical and pore-network modelling derived three-phase flow functions to study the effect of capillary and gravity forces on fracture-matrix transfer. We also consider different matrix wettabilities and permeabilities, as well as matrix block size distributions. We then perform an upscaling step that is typical for field-scale recovery simulations and use the dual porosity model to represent fracture-matrix transfer processes that were observed at the grid-block scale. This enables us to analyse and improve the accuracy of dual porosity models for three-phase displacement processes inherent to WAG in NFR. We find that different three-phase saturation profiles develop inside matrix blocks, which are strongly dependent on wettability of the matrix. These profiles have a profound impact on recovery during WAG injection. The classical dual porosity model fails to capture these saturation profiles and hence miscalculates recovery during early WAG cycles. We present a double block dual porosity model, i.e. a simple multiple continua model, which better matches the fine grid simulation results.
Databáze: OpenAIRE
Externí odkaz: