Quantifying Wind Turbine Wake Characteristics from Scanning Remote Sensor Data

Autor: Matthew L. Aitken, Julie K. Lundquist, Robert M. Banta, Yelena L. Pichugina
Rok vydání: 2014
Předmět:
Zdroj: Journal of Atmospheric and Oceanic Technology. 31:765-787
ISSN: 1520-0426
0739-0572
DOI: 10.1175/jtech-d-13-00104.1
Popis: Because of the dense arrays at most wind farms, the region of disturbed flow downstream of an individual turbine leads to reduced power production and increased structural loading for its leeward counterparts. Currently, wind farm wake modeling, and hence turbine layout optimization, suffers from an unacceptable degree of uncertainty, largely because of a lack of adequate experimental data for model validation. Accordingly, nearly 100 h of wake measurements were collected with long-range Doppler lidar at the National Wind Technology Center at the National Renewable Energy Laboratory in the Turbine Wake and Inflow Characterization Study (TWICS). This study presents quantitative procedures for determining critical parameters from this extensive dataset—such as the velocity deficit, the size of the wake boundary, and the location of the wake centerline—and categorizes the results by ambient wind speed, turbulence, and atmospheric stability. Despite specific reference to lidar, the methodology is general and could be applied to extract wake characteristics from other remote sensor datasets, as well as computational simulation output. The observations indicate an initial velocity deficit of 50%−60% immediately behind the turbine, which gradually declines to 15%−25% at a downwind distance x of 6.5 rotor diameters (D). The wake expands with downstream distance, albeit less so in the vertical direction due to the presence of the ground: initially the same size as the rotor, the extent of the wake grows to 2.7D (1.2D) in the horizontal (vertical) at x = 6.5D. Moreover, the vertical location of the wake center shifts upward with downstream distance because of the tilt of the rotor.
Databáze: OpenAIRE