High Strain Rate Torsion Properties of Ultrafine-Grained Aluminum

Autor: J. Kokkonen, Jeremy D. Seidt, Mikko Hokka, V.-T. Kuokkala, Thomas Matrka, Amos Gilat
Rok vydání: 2011
Předmět:
Zdroj: Experimental Mechanics. 52:195-203
ISSN: 1741-2765
0014-4851
Popis: Mechanical properties of most metallic materials can be improved by reducing their grain size. One of the methods used to reduce the grain size even to the nanometer level is the severe plastic deformation processing. Equal Channel Angular Pressing (ECAP) is one of the most promising severe plastic deformation processes for the nanocrystallization of ductile metals. Nanocrystalline and ultrafine grained metals usually have significantly higher strength properties but lower tensile ductility compared to the coarse grained metals. In this work, the torsion properties of ECAP processed ultrafine grained pure 1070 aluminum were studied in a wide range of strain rates using both servohydraulic materials testing machines and Hopkinson Split Bar techniques. The material exhibits extremely high ductility in torsion and the specimens did not fail even after 300% of strain. Pronounced yield point behavior was observed at strain rates 500 s−1 and higher, whereas at lower strain rates the yielding was continuous. The material showed slight strain softening at the strain rate of 10−4 s−1, almost ideally plastic behavior at strain rates between 10−3 s−1 and 500 s−1, and slight but increasing strain hardening at strain rates higher than that. The tests were monitored using digital cameras, and the strain distributions on the surface of the specimens were calculated using digital image correlation. The strain in the specimen localized very rapidly after yielding at all strain rates, and the localization lead to the development of a shear band. At high strain rates the shear band developed faster than at low strain rates.
Databáze: OpenAIRE
Externí odkaz: