Digitally Controlled Single-inductor Multiple-output Synchronous DC-DC Boost Converter with Smooth Loop Handover Using 55 nm Process
| Autor: | Young-Jun Park, Youngoo Yang, YoungGun Pu, Kang-Yoon Lee, Minjae Lee, Sang-Sun Yoo, SangYun Kim, Keum Choel Hwang, Abbas Syed Hayder |
|---|---|
| Rok vydání: | 2017 |
| Předmět: |
Forward converter
Engineering business.industry 020208 electrical & electronic engineering Ćuk converter 020206 networking & telecommunications 02 engineering and technology Inductor Control and Systems Engineering Modulation Boost converter 0202 electrical engineering electronic engineering information engineering Electronic engineering Digital control Electrical and Electronic Engineering business MATLAB computer Voltage computer.programming_language |
| Zdroj: | Journal of Power Electronics. 17:821-834 |
| ISSN: | 1598-2092 |
| DOI: | 10.6113/jpe.2017.17.3.821 |
| Popis: | This paper reports on a single-inductor multiple-output step-up converter with digital control. A systematic analog-to-digital-controller design is explained. The number of digital blocks in the feedback path of the proposed converter has been decreased. The simpler digital pulse-width modulation (DPWM) architecture is then utilized to reduce the power consumption. This architecture has several advantages because counters and a complex digital design are not required. An initially designed unit-delay cell is adopted recursively for the construction of coarse, intermediate, and fine delay blocks. A digital limiter is then designed to allow only useful code for the DPWM. The input voltage is 1.8 V, whereas output voltages are 2 V and 2.2 V. A co-simulation was also conducted utilizing PowerSim and Matlab/Simulink, whereby the 55 nm process was employed in the experimental results to evaluate the performance of the architecture. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|