Effects of pre-strain and annealing on the fatigue properties of complex phase steel CP800
| Autor: | Yazhuo Wu, Haofei Sun, Zhi Xiao, Wei Kai, Xujing Yang |
|---|---|
| Rok vydání: | 2020 |
| Předmět: |
Materials science
Annealing (metallurgy) Scanning electron microscope Bainite Mechanical Engineering 02 engineering and technology 021001 nanoscience & nanotechnology Industrial and Manufacturing Engineering law.invention 020303 mechanical engineering & transports 0203 mechanical engineering Optical microscope Mechanics of Materials law Modeling and Simulation Martensite Ultimate tensile strength Hardening (metallurgy) General Materials Science Composite material Elongation 0210 nano-technology |
| Zdroj: | International Journal of Fatigue. 131:105364 |
| ISSN: | 0142-1123 |
| DOI: | 10.1016/j.ijfatigue.2019.105364 |
| Popis: | This work was to experimentally explore the fatigue properties under the conditions of pre-strain and annealing for CP800. Meanwhile, the elongation of grains caused by pre-strain and the increase content of bainite and martensite caused by annealing were observed by using optical microscopy (OM) and scanning electron microscopy (SEM), respectively. An effective pre-strain range was found to increase the yield and tensile strengths by dislocation strengthening. Besides, the pre-strain presents a negative effect on fatigue life, while the fatigue life can be increased by annealing treatment. It is confirmed that the combined effect of the large pre-strain and annealing treatment leads to cyclic hardening fracture. Furthermore, two kinds of failure modes caused by surface defects and inclusions were revealed by using SEM. Eventually, the fatigue life can be well predicted with a model based on strain energy method. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect