2D simulations of hydride blister cracking during a RIA transient with the fuel code ALCYONE
| Autor: | Sercombe, J., Helfer, T., Federici, E., Leboulch, D., Le Jolu, T., Hellouin de Menibus, A., Bernaudat, C. |
|---|---|
| Přispěvatelé: | CEA-Direction des Energies (ex-Direction de l'Energie Nucléaire) (CEA-DES (ex-DEN)), Commissariat à l'énergie atomique et aux énergies alternatives (CEA), EDF-DIN-SEPTEN, Division GS - Groupe Enceintes de confinement, parent, amplexor, amplexor |
| Jazyk: | angličtina |
| Rok vydání: | 2015 |
| Předmět: | |
| Zdroj: | Top Fuel 2015 Top Fuel 2015, Sep 2015, Zurich, Switzerland |
| Popis: | International audience; This paper presents 2D generalized plain strain simulations of the thermo-mechanical response of a pellet fragment and overlying cladding during a RIA transient. A fictitious hydride blister of increasing depth (25 to 90% of the clad thickness) is introduced at the beginning of the calculation. When a pre-determined hoop stress is exceeded at the clad outer surface, radial cracking of the blister is taken into account in the simulation by a modification of the mechanical boundary conditions. The hoop stress criterion is based on Finite Element simulations of laboratory hoop tensile tests performed on highly irradiated samples with a through-wall hydride blister. The response of the remaining clad ligament (beneath the cracked blister) to the pellet thermal expansion is then studied. The simulations show that plastic strains localize in a band orientated at ~ 45° to the radial direction, starting from the blister crack tip and ending at the clad inner wall. This result is in good agreement with the ductile shear failures of the clad ligaments observed post RIA transients. Based on a local plastic strain failure criterion in the shear band, ALCYONE simulations are then used to define the enthalpy at failure in function of the blister depth. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|