Turbulence model comparison for compact plate heat exchanger design application
| Autor: | Francesco Vitillo, Cachon, L., Millan, P., Reulet, P., Laroche, E. |
|---|---|
| Přispěvatelé: | Broc, Alain, ONERA - The French Aerospace Lab [Toulouse], ONERA, CEA, Commissariat à l'énergie atomique et aux énergies alternatives (CEA) |
| Předmět: | |
| Zdroj: | Scopus-Elsevier International Congress on Advances in Nuclear Power Plants (ICAPP 2014) International Congress on Advances in Nuclear Power Plants (ICAPP 2014), Apr 2014, CHARLOTTE, United States |
| Popis: | In the framework of the Gas-Power Conversion System for the Advanced Sodium Technological Reactor for Industrial Demonstration (ASTRID) project design, works done at CEA are focused on the design of the sodium-gas heat exchanger. Compact plate heat exchangers are indicated as the most suitable technology for such applications. An innovative compact heat exchanger geometry is proposed in this paper: its innovationconsists increatinga 3D mixing flow. The proposed geometry has also very good mechanical resistance to high pressure gradients, being suitable for a large variety of flow applications. The flowfield inside such a channel is experimentally studied using the Laser Doppler Velocimetry (LDV) technique. The main velocity, the radial velocity as well as the Reynolds stressesare measured: data show the high level of flow mixing and the 3D flow pattern inside the channel. The experimental measurements are then used to validate turbulence models: in particular Reynolds-Averaged Navier-Stokes (RANS) equations are closed using both isotropic 2-equation isotropic eddy viscosity models and a Non-Linear Eddy Viscosity Model (NLEVM). Presented results represent the first step in the assessment of innovative high-performance compact plate heat exchangers that can be used to increase the plant efficiency as well as decrease the capital cost of the single component. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|