| Popis: |
In this study, Ferrite A (undoped barium hexaferrite), Ferrite B (MnCuNi-doped barium hexaferrite), Ferrite C (MnCuSr-doped barium hexaferrite), Ferrite D (MnCoNi-doped barium hexaferrite) and Ferrite E (MnCoSr-doped barium hexaferrite) powders were prepared by sol-gel processing. The produced powders were calcined at 550 °C for 6 h and sintered at 1000 °C for 5 h to obtain the required phases. The powders were characterized by differential thermal analysis/thermogravimetric analysis (DTA/TG), X-ray diffractometry (XRD) and scanning electron microscopy (SEM), and vibrating-sample magnetometry (VSM). The XRD patterns indicated that the pure barium ferrite phase was not obtained. The presence of M-type BaFe 11.6Mn 0.4O 19 was confirmed in the Ferrite B and Ferrite D patterns. In the Ferrite C pattern, there were the phases of BaFe 12O 19, Ba 2Cu 2Fe 12O 22 (X or Z-type) and Sr 3Fe 2O 6.16. The Ba 0.5Sr 0.5Fe 12 phase was easily observed in the Ferrite E pattern. The results showed that the dopant materials significantly change the particle shape of Ferrite A powders, but also lower the value of the coercivity. A higher saturation magnetization was observed for the Ferrite D powder. |
