| Autor: |
Hytönen, N., Ge, Y., Que, Z., Lindqvist, S., Nevasmaa, P., Virkkunen, I., Efsing, P. |
| Přispěvatelé: |
VTT Technical Research Centre of Finland, Department of Mechanical Engineering, KTH Royal Institute of Technology, Aalto-yliopisto, Aalto University |
| Jazyk: |
angličtina |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Hytönen, N, Ge, Y, Que, Z, Lindqvist, S, Nevasmaa, P, Virkkunen, I & Efsing, P 2023, ' Study of Fusion Boundary Microstructure and Local Mismatch of SA508/Alloy 52 Dissimilar Metal Weld with Buttering ', Journal of Nuclear Materials, vol. 583, 154558 . https://doi.org/10.1016/j.jnucmat.2023.154558 |
| DOI: |
10.1016/j.jnucmat.2023.154558 |
| Popis: |
Funding Information: The authors wish to express their gratitude for the funding and support from Ringhals AB, OKG AB, Teollisuuden Voima Oyj and VTT Technical Research centre of Finland within the FEMMA (Forum for the Effect of Thermal Ageing and Microstructure on Mechanical and EAC Behavior of Ni-based Alloy Dissimilar Metal Welds) research project. The authors also thank NKS for funding the NKS-FEMMA (AFT/NKS-R(22)134/4) project. The authors would like to thank P. Arffman, J. Lydman, A. Nurmela and L. Sirkiä for the experimental contributions. The authors would like to thank U. Ehrnstén, B. Forssgren, H. Reinvall and H. Hänninen for suggestions and discussions. Publisher Copyright: © 2023 The Author(s) A SA508/Alloy 52 dissimilar metal weld (DMW) mock-up with double-sided Alloy 52 butterings, which is fully representative of Ringhals pressurizer surge nozzle DMW repair solution, was studied. The microstructure, crystal structure, elemental diffusion, carbide formation and macro-, micro- and nano-hardness of the SA508/nickel-base Alloy 52 buttering fusion boundary (FB) were investigated. Three types of FBs were analyzed, i.e., narrow FB (∼80–85% of whole FB), tempered martensitic transition region (∼15%) and wide partially mixed zone (∼1–2%). The different FB types were induced by the local heat flow and respective elementary diffusion, which significantly influence the local hardness mismatch across the DMW interface and the local brittle fracture behavior. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
