Measurement-based Evaluation of the Impact of Large Vehicle Shadowing on V2X Communications
Autor: | Ignacio Rodriguez Larrad, Erika Portela Lopes de Almeida, Mads Lauridsen, Dereje Assefa Wassie, Lucas Chavarria Gimenez, Given Names Deactivated Family Name Deactivated, Troels Bundgaard Sørensen, Preben Elgaard Mogensen |
---|---|
Jazyk: | angličtina |
Rok vydání: | 2016 |
Předmět: | |
Zdroj: | Rodriguez, I, Portela Lopes de Almeida, E, Lauridsen, M, Assefa, D, Gimenez, L C, Nguyen, H C, Sørensen, T B & Mogensen, P E 2016, Measurement-based Evaluation of the Impact of Large Vehicle Shadowing on V2X Communications . in European Wireless 2016; 22th European Wireless Conference . VDE Verlag GMBH, European Wireless 2016, Oulu, Finland, 18/05/2016 . < http://ieeexplore.ieee.org/xpl/login.jsp?tp=&arnumber=7499287 > Aalborg University |
Popis: | Upcoming applications, such as autonomous vehicles, will pose strict requirements on the vehicular networks. In order to provide these new services reliably, an accurate understanding of propagation in the vehicular scenarios is needed. In this context, this paper presents a measurement-based evaluation of large vehicle shadowing at 5.8 GHz in V2X scenarios. The receiver antenna height is fixed to average vehicular height (1.5 m), while the transmitter antennas are located at different heights (1.5, 5, and 7 m) in order to investigate both V2V and V2I scenarios. A truck was used to obstruct the LOS between transmitter and receiver, and a large number of geometrical combinations of the scenario were explored. The statistical analysis of the measurement shows how in the V2V case, the experienced shadow levels are approximately 5 dB higher than in the V2I scenarios, where the shadow levels depend on the transmitter antenna height, reaching maximum values of 21-23 dB. The statistical analysis also shows that the differences in shadow level due to the non-symmetries of the obstacle truck are in the order of approximately 2 dB. A simple 3D ray-tracing simulation is validated against the measurements, showing a good match with a RMSE of 4.1 dB. Based on both measurements and ray-tracing data, a simple deterministic shadowing model, useful for implementation in system level simulators, is presented, as a first step towards a more dynamic and scalable shadowing model. |
Databáze: | OpenAIRE |
Externí odkaz: |