Analysis of diesel spray atomization by means of a near-nozzle field visualization technique
| Autor: | Payri Marín, Raúl, Salvador Rubio, Francisco Javier, Gimeno García, Jaime, De La Morena Borja, Joaquín |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2011 |
| Předmět: |
Primary atomization
Nozzle geometries Injection Operating condition Near-nozzle Hydraulic characterization Oscillatory behaviors Conical nozzle Density ratio Atomization process Liquid gas interface Atomization Reynolds number Phase interfaces Diesel spray Injection (oil wells) High Resolution Visualization MAQUINAS Y MOTORES TERMICOS Spray cone angle Visualization technique Field visualization Spray nozzles |
| Zdroj: | RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia instname |
| ISSN: | 2011-2629 |
| DOI: | 10.1615/AtomizSpr.v21.i9 |
| Popis: | [EN] In this paper, a high-resolution visualization technique has been used in order to characterize Diesel spray structure in the near-nozzle field. For this purpose, three conical nozzles with different diameters have been used to relate nozzle geometry and spray behavior in non-cavitating conditions. As a first step, geometrical and hydraulic characterization of the nozzles has been performed. The analysis of the images obtained has shown that spray aperture varied significantly during the first millimeters of the spray, until reaching to the stabilized value of spray cone angle, which is the one usually characterized by other visualization techniques. Furthermore, the structure of the liquid-gas interface presented an oscillatory behavior, which is related to primary atomization process. These oscillations have been quantified and statistically correlated with nozzle geometry and operating conditions by means of three different non-dimensional numbers: Reynolds number, air/fuel density ratio, and Ohnesorge number. © 2011 by Begell House, Inc. This research was sponsored by Vicerrectorado de Investigacion, Desarrollo e Innovacion of the Universitat Politecnica de Valencia, under the Project ` Estudio numerico del flujo en toberas de inyeccion diesel con aproximacion LES y mediante grid computing (LESFLOWGRID), Reference 2837, and by Ministerio de Ciencia e Innovacion, under the Project Estudio teorico experimental sobre la influencia del tipo de combustible en los procesos de atomizacion y evaporacion del chorro Diesel (PROFUEL), Reference No. TRA2011-26293. This support is gratefully acknowledged by the authors. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|