Experimental study on heat recovery using multi tube tank: effect of changing the head shape
| Autor: | Jaber, Hassan, Khaled, Mahmoud, Lemenand, Thierry, Elhage, H, Hachem, F., Ramadan, Mohamad |
|---|---|
| Přispěvatelé: | Laboratoire Angevin de Recherche en Ingénierie des Systèmes (LARIS), Université d'Angers (UA), Energy and Thermo-Fluid group, School of Engineering, Lebanese International University (LIU) |
| Jazyk: | angličtina |
| Rok vydání: | 2017 |
| Předmět: | |
| Zdroj: | ICEREGA 2017 5th International Conference on Emerging and Renewable Energy: Generation and Automation ICEREGA 2017 5th International Conference on Emerging and Renewable Energy: Generation and Automation, Jul 2017, Belfort, France |
| Popis: | International audience; This work presents a heat recovery system utilized to heat water from exhaustgases of a chimney. A waste heat recovery system is suggested named as “multi tube tank”. The suggested design is illustrated and described. The system is constructed and tested. In order to enhance the system effect of changing the head shape is studied. Two head were constructed: cylindrical and conical. Results shows that conical head reflected better performance compared to cylindrical head. For a cylindrical head water temperature increase to maximum 60 °C in 275 min. while for conical 16 head water temperature increased to 70 °C in 275 min and the system was able to increase the water temperature more up to 80 °C in 400 min. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|