Effects of additives on the synthesis of TiCxN1−x by a solid-gas mechanically induced self-sustaining reaction
| Autor: | Chicardi, E., Gotor, F.J., Alcalá, M.D., Córdoba, J.M. |
|---|---|
| Přispěvatelé: | Ministerio de Economía y Competitividad (España), European Commission |
| Rok vydání: | 2018 |
| Předmět: | |
| Zdroj: | Digital.CSIC. Repositorio Institucional del CSIC instname |
| Popis: | The synthesis of TiCN from Ti/C mixtures in a N atmosphere performed in a high-energy planetary mill was used as example to study the influence of the use of additives in mechanically induced self-sustaining reaction (MSR) processes. In particular, the effect of the addition of TiN, TiC, SiN and SiC was analyzed. The self-sustaining reaction was extinguished when additive contents of 50, 40, 40 and 30 wt% for TiN, TiC, SiN and SiC, respectively, were employed. These additives cannot be regarded as real inert since they served as an extra solid source for nitrogen and carbon, modifying the final stoichiometry of the TiCN phase. The adiabatic temperature (T) determined for the mixtures with no MSR effect was well above the empirical limit value of 1800 K adopted as criterion for the occurrence of the self-propagating high-temperature synthesis (SHS) process. The ignition time (t) of the MSR process was practically invariant for low additive contents (approximately 50 min) and tended to increase up to maximum values of 85–95 min for the larger additive contents. This work was supported by the Spanish government under Grant no. MAT2014-52407-R financed in part by the European Regional Development Fund. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|