| Přispěvatelé: |
Yener, T, Altinsoy, I, Yener, SC, Efe, GFC, Ozbek, I, Bindal, C, Sakarya Üniversitesi/Mühendislik Fakültesi/Metalurji Ve Malzeme Mühendisliği Bölümü, Yener, Tuba, Altınsoy, İbrahim, Yener, Şuayb Çağrı, Çelebi Efe, Gözde Fatma, Özbek, İbrahim, Bindal, Cuma |
| Popis: |
In this study, the influences of B4C ratios on some mechanical and physical properties such as relative density, microhardness and electrical properties of cold pressed Cu-B4C composites were investigated. Curve fitting is applied for the estimation of electrical conductivity. Commercial copper powders with 40 mu m particle size were reinforced with B4C, with particle size of 40 mu m, at ratios of 1, 2, 3 wt.%, for improving mechanical properties of copper used as electrical conductor. Cu-B4C composites have been fabricated by powder sintering process at a temperature of 900 C for 2 h. The presence of Cu and B4C, which are dominant components in the sintered composites, were confirmed by X-ray diffraction analysis technique and SEM-EDS. Scanning electron microscope (SEM-EDS) has shown that B4C particles are distributed homogenously in the copper matrix. The relative densities of Cu and Cu-B4C composites, sintered at 900 degrees C, ranged from 95.7 to 91.6%. Microhaidness of composites ranged from 84.5 to 94.6 HS. It was observed that cold pressed Cu-1 wt.% B4C composites revealed promising physical properties. Results of electrical conductivity measurement of Cu-B4C composite material are compared to the results of the model and the overall accuracy level above 96% is obtained. |
