| Autor: |
Koskinen, Ari, Leskelä, Esa |
| Jazyk: |
angličtina |
| Rok vydání: |
2015 |
| Předmět: |
|
| Zdroj: |
Koskinen, A & Leskelä, E 2015, Comparison of Artificial flaws in Austenitic Steel Welds with NDE Methods . in Proceedings of the 11th international conference on NDE in relation to structural integrity for nuclear and pressurized components . European Union, 11th International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurized Components, Jeju Island, Korea, Democratic People's Republic of, 19/05/15 . https://doi.org/10.2790/13215 |
| Popis: |
Qualification of non-destructive examination (NDE) procedures for in-service inspections (ISI) of nuclear power plant (NPP) components is performed using different types of artificial flaws. The assessment of the reliability of a procedure requires representative flaws compared to the real service-induced flaws. Fatigue cracks can nowadays be produced artificially as thermal fatigue or mechanical fatigue cracks. Thermal fatigue crack production is very well controlled in matter of size and opening. That kind of cracks are very realistic option compared to the real service-induced cracks. Mechanical fatigue crack production is well known and widely used method and can produce very realistic cracks as well. The aim of the study is to get a wider perspective to the differences in similar type of flaws from different manufacturers. Ultrasonic indications are highly dependent on defect characteristics like roughness, crack opening, tilt and branching. This work studies the influence of different reflector properties on flaw indications. Two kinds of artificially produced cracks from different manufactures and one EDM (electric discharge machining) reference notch were made in welded austenitic stainless steel test blocks. Flaws were examined using conventional ultrasonic testing (UT), phased array ultrasonic testing (PAUT) and computed tomography (CT). The flaws were sized with different techniques and those results are compared to the true state flaw dimensions as determined by destructive analysis. This study was made as a part of Finnish national research program on NPP safety 2010-2014 (SAFIR2014), Monitoring of the structural integrity of materials and components in reactor circuit, MAKOMON project. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
