| Autor: |
von Mühlen, Carin, Khummueng, Weeraya, Alcaraz Zini, Claudia, Bastos Caramão, Elina, Marriott, Philip J. |
| Zdroj: |
Journal of Separation Science (JSS) (formerly Journal of High Resolution Chromatography); August 2006, Vol. 29 Issue: 12 p1909-1921, 13p |
| Abstrakt: |
The detector is an integral and important part of any chromatographic system. The chromatographic peak profiles (i. e.peak separation) should, ideally, be unaffected by the detector – it should only provide the sensing capacity required at the end of a column separation process. The relatively new technique of comprehensive 2‐D GC (GC×GC) extends the performance of GC manyfold, but comes at a price – existing GC systems may not be adequately designed with the requirements of GC×GC in mind. This is primarily the need for precise measurement of very fast peaks entering the detector (e. g. as fast as 50 ms basewidth in some instances). The capacity of the detector to closely track a rapidly changing chromatographic peak profile depends on a number of factors, such as design of flow paths and make‐up gas introduction, type of detector response mechanism, and the chemistry of the response. These factors are discussed here as a means to appreciate the technical demands of detection in GC×GC. The MS detector will not be included in this review. |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
Plný text