| Abstrakt: |
Slaughterhouse wastewater (SWW) is considered an industrial wastewater, which seriously harms the environment due to the high concentration of contaminants such as biochemical oxygen demand (BOD), chemical oxygen demand (COD), and total suspended solids (TSS). Additionally, the wastewater from slaughterhouses contains harmful bacteria. This study used a lap-scale model to treat SWW from a local private slaughterhouse. The treatment process involves three stages: adsorption using activated carbon, which is derived from sawdust, followed by sedimentation, and finally, a slow sand filter with a modified layer of woven textile cotton. The first two steps were tested to obtain the ideal operation condition of the treatment system. After the final step of treatment, we evaluated the overall process using a modified slow sand filter (MSSF). We used a Jar test to determine the optimal dosage of activated carbon from sawdust (ACS). The monitored parameters were physicochemical, such as turbidity, total suspended solids (TSS), total dissolved solids (TDS), biochemical oxygen demand (BOD), chemical oxygen demand (COD), total phosphorus (TP), and total nitrogen (TN). The bacteriological examination included both total coliform count (TCC) and fecal coliform count (FCC). The results of the jar test revealed that the optimal ACS dose was 2.0 g/l. After adjusting the contact time and pH levels for the adsorption process, we discovered that the ideal contact time was 100 min and the ideal pH level was 4.0. Finally, we evaluated the entire treatment system by applying the MSSF after the sedimentation process, and found that the removal efficiencies of turbidity, BOD, COD, TSS, TDS, TP, and TN were 97.14, 94.80, 91.80, 98.96, 81.17, 81.12, and 82.50%, respectively. This is in addition to the filter's ability to remove bacteria counts at a rate of up to 98.93 and 99.13% of TCC and FCC, respectively. |
Full text from SpringerLink