| Abstrakt: |
In this work, a facial ultrasound technique was employed to synthesize poly (N1-((6-aminopyridin-2-yl)carbamothioyl)-N3-carbamothioylisophthalamide) (PTUA) as a new polymer from a condensation reaction of isophthaloyl diisothiocyanate and 2, 6-diaminopyridine. Different techniques were utilized to identify the chemical structure of the synthesized polymer including FTIR spectra, 1HNMR spectra, thermal gravimetric analysis (TGA), Brunauer-Emmett-Teller (BET), and field emission scanning electron microscopy (FESEM). The capability of the synthesized polymer to adsorb Bismarck brown Y (BBY) dye from an aqueous solution was analytically evaluated. Several effective parameters on the adsorption process including contact time, pH, dye concentration, adsorbent dose, and temperature were extensively investigated. The adsorption process was found to be completed with a contact time of 45 min. The results indicated that the optimal adsorption pH was 8 with removal efficiency of 85.331 % and the adsorbed amount of BBY dye increased when the temperature was increased. The adsorption isotherms analysis revealed that the Langmuir model with a correlation coefficient (R2 = 0.9982) was the most relevant to describe the adsorption process compared with the Freundlich model (R2 = 0.9863). By applying the Langmuir isotherm, the maximum adsorption capacity was obtained with a value of 132.39 mg/g. The study of adsorption kinetics showed that the adsorption model of BBY dye onto the polymer surface significantly correlated with a pseudo-second-order model. Based on the thermodynamic studies, the calculated ΔG was negative, ΔH was endothermic, and ΔS was positive, verifying the adsorption process is spontaneous. The desorption percentage of BBY dye was calculated with a value of 81.574 % utilizing methanol as an optimal solvent. The density functional theory (DFT) approach was applied to acquire good understanding for the adsorption process. |
Full Text from ScienceDirect