| Abstrakt: |
The adsorption performance of three-dimensionally ordered macroporous (3DOM) alumina doped with iron oxide, and subsequently modified with (3-aminopropyl)triethoxysilane (APTES), FeAl2O3and FeAl2O3APTES, was used for enhanced Pb2+, Cd2+and Ni2+removal. The phase composition and the structural and surface/textural properties of the obtained adsorbents were analyzed by X-ray diffraction analysis, field emission scanning electron microscope, energy dispersive X-ray analysis, thermogravimetry, Fourier-transfer infrared spectroscopy, specific surface area of the samples and point of zero charge determination. Adsorption of selected cations was examined in the batch conditions using different contact time, adsorbent dosage and temperatures. Different models of the adsorption isotherms were used for determination of the adsorption capacities, in which the best fit of Freundlich and Langmuir model was obtained for FeAl2O3, that is, Freundlich model for FeAl2O3APTES. A significant increase of adsorption capacities: from 44.21 to 51.66 mg g–1for Pb2+, 25.69 to 32.96 mg g–1for Cd2+and 19.48 to 24.64 mg g–1for Ni2+was obtained for FeAl2O3and FeAl2O3APTES, respectively, which indicated the significance of the macroporous structure of 3DOM alumina and subsequent amino-terminal modification. The values of the correlation coefficient (R2) suggested that pseudo-second kinetic model best describes Pb2+, Cd2+and Ni2+adsorption on FeAl2O3APTES, and Cd2+and Ni2+onto FeAl2O3, while second kinetic model gave the highest correlation coefficients for Pb2+adsorption on FeAl2O3. |
