| Autor: |
Zhang, Huijie, Miao, Jian, Wang, Kun, Yu, Chi, Mei, Ruibin, Lin, Xiaoping |
| Zdroj: |
Journal of Materials Research and Technology; July-August 2024, Vol. 31 Issue: 1 p1665-1674, 10p |
| Abstrakt: |
In order to explore the weldability and widen the applicability of high entropy alloys (HEAs), dissimilar friction stir lap welding of pure copper and Al0.1CoCrFeNi alloy was investigated in this research. The results indicate that a sound dissimilar weld without tunnels and voids is produced, where a ∼20 μm thick interfacial layer is evident at the Cu-HEA interface. The lap joint is fractured at the upper Cu sheet rather than the lap surface during tensile shear test, suggesting an effective bonding of the dissimilar materials. The lap weld roughly consists of three layers along the plate thickness direction, i.e. welds of Cu, HEA and Cu-HEA interface, respectively. The interface of weld, which has experienced the most severe Cu-HEA interaction during welding, is characterized by uniformly distributed and highly recrystallized ultra-fine grains (∼0.79 μm). Meanwhile, intermetallic compounds particles (Al13Cr2and Al13Co4) ranging in size of 150∼400 nm are generated at the fine grain boundaries. Fast diffusion of Al, Cr and Co elements and easy segregation of these elements during welding result in the formation of the particles. The sufficient DDRX and the pinning effect of particles are responsible for the formation of ultra-fine grains in the weld interface. The present study lays a theoretical foundation for the joining of conventional Cu and the multi-component HEA, which contributes to the improvement of HEA availability in the field of manufacturing industry. |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
