| Autor: |
Haponova, Oksana, Tarelnyk, Viacheslav, Tarelnyk, Nataliia, Kurp, Piotr |
| Zdroj: |
Diffusion and Defect Data Part B: Solid State Phenomena; February 2024, Vol. 355 Issue: 1 p85-93, 9p |
| Abstrakt: |
The paper presents an analysis of technologies for improving the quality parameters of the surface layers of parts, which were carried out by the method of electrospark alloying (ESA) and by additional saturation of surfaces with alloying elements from special process media (STM). The technology of sulfocementation was considered. Metallographic and hardness tests after sulfocementation by ESA showed that the treated surface consists of layers: "soft", hardened and base metal. As the discharge energy increases, the thickness, microhardness and integrity of the coating increase. The presence of sulfur in STM promotes the sulfidation process. It is shown that sulfur accumulates on the surface of the metal at a depth of up to 30 μm. This zone is characterized by reduced microhardness. A strengthened layer is formed under this layer, it has an increased carbon content and high microhardness. |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
