| Abstrakt: |
Prior efforts to model bacterial thermal inactivation in and on low-moisture foods generally have been based on isothermal and iso-moisture experiments and have rarely included dynamic product and process variables. Therefore, the objective of this study was to test appropriate secondary models to quantify the effect of product temperature, product moisture, and process humidity on thermal inactivation of SalmonellaEnteritidis PT30 on pistachios subjected to dynamic dry- or moist-air heating. In-shell pistachios were inoculated with SalmonellaEnteritidis PT30, equilibrated in controlled-humidity chambers (to target water activities [aw] of 0.45 or 0.65), and in some cases, subjected to a presoak treatment prior to heating in a laboratory-scale, moist-air convection oven at multiple combinations (in duplicate) of dry bulb (104.4 or 118.3°C) and dew point (∼23.8, 54.4, or 69.4°C) temperatures, with air speed of ∼1.3 m/s. Salmonellasurvivors, pistachio moisture content, and awwere quantified at six time points for each condition, targeting cumulative lethality of ∼3 to 5 log. The resulting data were used to estimate parameters for five candidate secondary models that included combinations of product temperature, product moisture, aw, and/or process dew point (coupled with a log-linear primary model). A model describing the D-value as a function of temperature and dew point fit the data well (root mean squared error [RMSE] = 0.86 log CFU/g); however, adding a term to account for dynamic product moisture improved the fit (RMSE = 0.83 log CFU/g). In addition, product moisture content yielded better model outcomes, as compared with aw, particularly in the case of the presoaked pistachios. When validated at the pilot scale, the model was conservative, always underpredicting the experimental log reductions. Both dynamic product moisture and process humidity were critical factors in modeling thermal inactivation of Salmonellain a low-moisture product heated in an air-convection system. |
