| Autor: |
Oprişan, C M, Chiriac, B, Tufescu, A, Olaru, D N |
| Zdroj: |
IOP Conference Series: Materials Science and Engineering; October 2022, Vol. 1262 Issue: 1 p012012-012012, 1p |
| Abstrakt: |
Using an unidirectional oscillator including a mass-spring system, the authors evidenced the important variations of the static friction coefficient both for very low contact pressure (0.002 MPa) and for high contact pressure (386 MPa).The experiments were realised by the CETR UMT-2 Tribometer with a variation of the sliding speed between 0.02 mm/s to 8 mm/s. The oscillator mass have 0.242 grams and the stiffness of the elastic spring had 77 N/m. The contact surface of the oscillator mass have a roughness Ra= 0.1 μm and the opposite plane surfaces have roughness of Ra= 0.1 μm and Ra= 2.5 μm. Two types of experiments were realized: the sliding between two plane surfaces with a nominal pressure of 0.002 MPa and the sliding between a plane surface and three steel balls of 6 mm with a maximum Hertz contact pressure of 386 MPa. For very low pressure the obtained static friction coefficient varied between 0.08 to 0.3 and the dynamic friction coefficient varied between 0.08 to 0.16. For high pressure the obtained friction coefficient varied between 0.2 to 0.4 and the dynamic friction coefficient varied between 0.15 to 0.2. To simulate the sliding speed the model of Zuleeg [5] for dynamic friction coefficient has been adapted to the experimental parameters and the dynamic equation of mass displacement as function on time has been numerical integrated. |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
