| Autor: |
Rupesh, P. L., Arulprakasajothi, M., Raja, K. |
| Zdroj: |
International Journal of Information Technology; May 2022, Vol. 14 Issue: 3 p1455-1465, 11p |
| Abstrakt: |
In routine existence, the utilization of vehicles is increasing in a enormous way among the people. This leads to the production of vehicles in a high rate. The engine parts used for the proper functioning of the vehicles needs a extreme care. These parts are subjected to extreme load and stress. As the engine produces work used to move the vehicles due to the combustion of fuel taking place inside the parts, they are subjected to high thermal stress (or) high temperature. The temperature at which the part elongates should be determined before the parts are incorporated inside the engine. The parts can be subjected to heat flow equal to one that is produced during combustion and the temperature gradient on the surface of the engine part can be calibrated. The present work concentrates on the experimental recognition of the temperature gradient on the surface of a V-notch specimen. The experimental recognition has been done by the utilization of a special paint which changes its color as subjected to temperature rise. The colors obtained from the experimental observation has been verified by two color identification methods. The color identification methods and the experimental results were hold in good agreement. |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
Full text from SpringerLink