| Autor: |
Sharif, Umer, Sun, Bei Bei, Zhao, Peng, Ibrahim, Dauda Sh., Adewale, Orelaja Oluseyi, Zafar, Aleena |
| Zdroj: |
Materials Science Forum; October 2021, Vol. 1047 Issue: 1 p31-38, 8p |
| Abstrakt: |
In this article a sandwich beam structure with honeycomb core filled of MRE (magnetorheological elastomer) with different ratios of Elastomer and iron particles is proposed. Modal response for structures with Nylon and Resin8000 honeycomb core filled with MRE and sandwiched between aluminum face sheets were analyzed and compared for two different ratios of MRE by placing magnets at free end and center of the structure. The force generated by magnets on the sandwich beam structure was calculated using ANSYS EDT and the modal response of the structure was then observed under generated magnetic force using ANSYS Workbench. The results showed that the resonance frequency of the structure decreased as the magnetic intensity was increased for all the cases specially for the first mode. Secondly structure with Nylon honeycomb core showed lower frequency drop and higher deformation than the structure with Resin8000 honeycomb core. |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
