| Autor: |
Ky, Le Hong, Danh, Bui Thanh, Cuong, Nguyen Van, Linh, Nguyen Hong, Hong, Tran Thi, Giang, Tran Ngoc, Tam, Do Thi, Pi, Vu Ngoc |
| Zdroj: |
Materials Science Forum; January 2021, Vol. 1018 Issue: 1 p59-64, 6p |
| Abstrakt: |
The purpose of this work is to find an optimal combination of the input parameters when electrical discharge machining (EDM) cylindrical shaped parts so that both the surface roughness and the electrode wear are minimum. In this study, four input parameters including the pulse on time, the pulse off time, the current, and the serve voltage were taken into account. Experimental plan was designed based on L9 orthogonal array. Also, Taguchi method and Grey Relational Analysis (GRA) were joined for solving the multiobjective optimization problem and to find optimum input parameters. Experiments with optimal input parameters were performed for proving the predicted model. The experimental results of the surface roughness and the electrode wear matched with the calculated model. This indicates the proposed models can be used for practice. |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
