| Autor: |
Virkunwar, Anwesh K., Ghosh, Shouvik, Basak, Ranjan |
| Zdroj: |
Advances in Science and Technology; May 2021, Vol. 106 Issue: 1 p10-16, 7p |
| Abstrakt: |
In present work, Aluminium 6061 was reinforced by varying the percentage of sugarcanebagasse ash (SCBA). Al-SCBA composite samples were fabricated by stir casting method. The weartest conducted on the samples using a pin on disc machine under the normal sliding condition. Basedon the testing parameters (Volume fraction ‘V’, Load ‘L’, sliding speed ‘S’) an L27 Orthogonal arraydesign was selected. According to L27 array, the wear & friction test was conducted. variance analysis(ANOVA) was performed to find out the important parameter and contribution in percentage for eachparameter on the composite material. To verify the analysis results with experimented resultconfirmation test was carried out. Further, to find the wear mechanism on the composite sampleselectron microscopy (SEM) test was used. |
| Databáze: |
Supplemental Index |
| Externí odkaz: |
|
