Influence of Al2O3addition on microstructure and mechanical properties of 3YSZ-Al2O3composites

Autor: Abden, Md. Jaynul, Afroze, Jannatul Dil, Gafur, Md. Abdul, Chowdhury, Faruque-Uz-Zaman
Zdroj: Materialpruefung. Materials Testing. Materiaux Essais et Recherches; June 2015, Vol. 57 Issue: 6 p499-505, 7p
Abstrakt: The effect of the amount of Al2O3content on microstructure, tetragonal phase stability and mechanical properties of 3YSZ-Al2O3composites are investigated in this study. The ceramic composites are obtained by means of uniaxial compacting at 210 MPa and green compacts are sintered at 1550 °C for 3 h in air. The monoclinic zirconia (m-ZrO2) phase has completely been transformed into tetragonal zirconia (t-ZrO2) phase with corresponding higher Al2O3content. The t-ZrO2grains induce transgranular fracture mode that has contribution in improvement of fracture toughness. The maximum flexural strength of 340 MPa, Vickers hardness value of 14.31 GPa and fracture toughness of 5.1 MPa × m1/2in the composition containing 40 wt.-% Al2O3is attributed to the microstructure with t-ZrO2grains as inter- and intragranular particles in the Al2O3grains, which makes it suitable for dental applications.
Databáze: Supplemental Index